• Complete set to retrofit the original Audi side assist for Audi A7 4K
• Intelligent technique for monitoring the traffic behind and beside the vehicle
• Warning of approaching vehicles or vehicles which are floating with the traffic
• The installed radar sensors (left and right site in the rear bumper) monitors the rear area and the area beside the vehicle from a speed of 30 km/h
• The system measures the distance and the different speed between you and the other vehicles
• Indicators in both exterior mirrors alert about critical situations

Selectable options:

• Left-hand-drive (PR. No.: L0L)
• Right-hand-drive (PR. No.: L0R)

Scope of delivery:

• Wiring set
• Radar sensors + holder
• Indicators for exterior mirrors
• caps for mirrors
• Codierdongle

Note:

• Only suitable for vehicles with acc (PR-No.: 8T5 or 8T8)
  
• Component protection of the control parts must be removed at the Audi dealer
  
• The caps of the mirrors are delivered primed, painting required
• For mirror caps which are not painted (for example alu) they have to be ordered by yourself
• The delivered hardware partly comes from test vehicles and went through a comprehensive functional test. The software is up to date
• Compatibility of the door control units must be checked: there are 3
  different hardware versions of the door control units (Lowline "3" -
  Midline "5" - Highline "7") required for "Side Assist" is Highline
• To determine if you have the right door control units, the part number must be read out by diagnostics
• Example part number: XXX 959? 9X + index letter such as A, B, C
• the location of the ? "Question mark" is crucial
• ? = 3 = not compatible - door control unit must be replaced
• ? = 5 = not compatible - door control unit must be replaced
• ? = 7 = compatible for retrofitting "Side Assist"
• e.g. 4M1959793X / 4M1959792X are suitable, 4M1959593X / 4M1 959 592X are to be replaced
• In case the ex Factory installed control units are not suitable, you need to use the control units in our "Accessories" area. This ensures that the control unit has correct software and data sets